Inspecting Tube Ends

 

The MAC Solution

  • Fulfills 24API 5CT & 5L
  • Detects ID & OD longitudinal and transverse notches down to 5% of the tube wall
  • Detects lamination 6.2mm FBH
  • Measures wall thickness
  • Innovative Automated
    Pitch Control
  • Unique end plug cone follows unstraight tube ends

All NDT test methods have some limitation in regard to testing to the very end of a tube. These “untested
ends” must be cut off, resulting in a substantial loss of product and revenue, or the manufacturer needs to
develop a method to test these ends to meet the tube integrity requirement. Some industries require that the
end be tested to a higher level of integrity because it is being expanded, threaded, or welded in the field,
and end integrity is critical to the tube performance. MAC’s new UT End Tester provides a solution to this
problem.

MAC’s Echomac FD-5 electronics provide the25
critical software for controlling the transducers
and receiving, adjusting, analyzing, and
reporting the test results.

The Echomac® UT End Tester consists of two
independent, identical test stations designed to
inspect the untested portion of a tube end.
Generally this portion would range between 250
and 500mm from the tube end, depending on the
application.26

DOWNLOAD Pdf